Rousch Premium Low Profile Micro Gas Block Melonite Black Nitride
Rousch Premium Low Profile Micro Gas Block Melonite Black Nitride .750
Machined and Melonited In the USA with American Hands.
Purposeful Design = Best Possible Install, Fitment and Reliability
Not only easier to Install the gas tube roll pin but more reliable.
Rousch Premium Low Profile Micro Gas Block Melonite Black Nitride Spefications:
- Machined and Melonited In the USA with American Hands.
- Mounting: Set Screw Design (Two Set Screw on the Bottom of the Gas Block)
- Inside Diameter: .750″ (Will fit true .750 Barrels)
- Style: Low Profile – Micro
- Platform: AR 15, AR 10,
- Adjustable: NO
- Material: Steel
- Includes one roll pin
Why we created this Premium Gas Block?
We wanted to design a Gas block that had the straightest roll pin hole on the market and would make the installation of the roll pin very easy. We actually drill the Gas Tube Roll pin hole with three different tools. This ensures a super straight hole.
We wanted to design a gas block that had very tight fitment between the gas tube and gas block (Minimize Leakage). Once again we kept the tolerance where the gas tube would almost press fit into the gas block. This may require a few taps on the gas tube to fit into the gas block but once the tube is in there will be a super fit to Minimize Any Gas Leakage. May require a Gunsmith to fit properly.
We wanted a snug fit between the barrel and the gas block. We hold a tolerance when machining this block to ensure a snug fit with true .750 barrels. In our test of many barrels we have found that many none premium barrels manufactures do not hold a .750 tolerance on there barrels. Please verify your barrel is a true .750 barrel.
We wanted the installation of the gas tube roll pin to be Easier than Normal? We designed the side of the block where the roll pin is installed to be flat. We did this so when driving the roll pin in a small scrap piece of wood or gunsmith block (preferred) could be used to ensure a firm surface when driving the roll pin in. Most standard gas blocks have a rounded areas next to the roll pin. This make driving the roll pin a game of chase the block around the bench as you drive the pin in. A flat surface makes the installation of the roll pin much easier and straight.
We wanted the best protection to the surface with could find. We were tired of Phosphates ability to corrode is not oiled all of the time. We not only chose Melonite QPQ (aka Black Nitride) We tried many different companies and went with the most expensive company as they were by Far The Best.
We wanted our Gas Block to not only be the Best functioning Gas block (In Our Eyes) but we wanted it to look as amazing as it worked. We chose a Decagonal design with nice clean chamfered edges. On our first run of this block we also milled “Made In USA” on left side of the block.